How to Turn On, Operate and Turn Off The School Hall PA System:

Setting Up/Turning On:

1. Turn on the light switch on the right hand side of the wall
2. Turn on 4 switches located right hand side of the bottom cupboard
3. Turn on both Power Amps (A) and (B)
4. Power Amp (B): Turn both dials so they are facing 3 O'clock
5. Turn the 2 master faders up to 0 (located on the mixing desk on the bottom right hand side, coloured yellow)

Operating:

1. Take out the UHF1 Mic located in the above cupboards of the mixing table, on the left hand side
2. Switch on the mic and turn the UHF1 faders up to 0
3. Make sure the battery work and text the mic (test 1, 2)
4. Set up mic stands (according to how many lectern mics are needed set up what is required)
5. Set up the lectern Mic located stage West and stage east
6. Turn up the lectern mic faders to 0
7. Check the mic is working correctly and cleary by testing the mic (Test 1, 2)
8. Check that the phantom power is switched on

Turning Off:

1. Switch off all microphones
2. Turn down all microphone faders
3. Turn the master faders down on the mixing desk
4. Turn the dails located on AMPs (A) and (B) to zero
5. Switch the switches off on Amp (A) and (B)
6. Turn The 4 switches located in the bottom cupboard on the righthand side
7. Carefully pack all microphone stands away and place microphones and stands in there allocated spot in the bio box
8. Turn the light switch off in the bio box